Wave Soldering Fingers

Feel free to contact us with any questions you may have regarding our products.


JS07-010-145	JS07-011-190	JE001-239-190

JE001-239-193	JE001-240-145	JE001-241-690


JE001-241-990	JE001-242-145	JE001-242-190

JE001-242-198	JD001-420-145	JD001-420-190


JE001-421-145	JE001-421-190	JD001-423-145

JD001-423-190	JT07-110-145	JT07-134-190

LUBCON Products

Greases:

Product Name

Temp. Range

Description

Corrolub CAK-line*

-20°C
to
+150°C

Mineral oil containing grease. Special developed for the marine environment. Suitable for high vibrations and shockloads at elevated temperatures.

Corrolub CAN-line*

-30°C
to
+200°C

Fully synthetic grease specially developed for the marine environment. Allows long service life for bearings exposed to high vibrations and shockloads. Outstanding water resistance.

ELC / Electrically Conductive Greases

-40°C
to
+180°C

ECONOMICAL SOLUTION TO BEARING CURRENT DAMAGE IN ELECTRICAL MOTORS WITH VARIABLE SPEED DRIVES. For the first time ever it is possible to have a conductive grease that does not cause premature bearing failure due to the conductive additives in the grease. ELC is available for different applications ranging from high temp to high speed.

Grizzly Grease

-30°C
to
+150°C

Heavy duty open gear grease. Excellent water resistance.

Sintono Mega 2

-30°C
to
+260°C

Special grease for high-load and high-temperature applications. High thermal resistance,high pressure resistance, good resistance to media, corrosion protection.

Sintono Terra HL-line

-40°C
to
+140°C

Special lubricants for the lubrication of guiding surfaces providing good water resistance. Fully synthetic.

Sintono Terra SK-line*

-40°C
to
+120°C

Biodegradable wheel flange lubricant for railway vehicles. Fully synthetic, high resistance of the lubricating film even at increased temperatures. Excellent water resistance, very good flowability at low temperatures. Good wear protection.

Sintono Terra W-line*

-40°C
to
+120°C

Biodegradable switch lubricant for winter, summer operation. Fully synthetic, excellent water resistance and a very good flowability at low temperatures. Excellent wear protection.

Terragliss WZ

-40°C
to
+130°C

Special product for the lubrication of switch tongues. Hardly binds any dirt or dust. Fully synthetic.

Thermoplex 2 HPL

-40°C
to
+180°C

High-speed grease with low start-up friction suitable for high mechanical loads in the lubrication of belt tighteners. Fully synthetic.

Thermoplex 2 TML

-35°C
to
+160°C

This efficient lubricating grease for high temperatures, high loads and high speeds up to N.dm 1.3 million (min-1.mm) is successfully used in spindles, electric motors, fans as well as in small and miniature bearings.Fully synthetic and is compatible with NBR,FKM,PTFE and PA6.6.

Thermoplex 2 TML Special

-60°C
to
+140°C

Low-temperature high-speed grease with low coefficients of friction and low start-up friction for the lifetime lubrication of starters. Fully synthetic.

Thermoplex ALN 1001/00*

-40°C
to
+150°C

A synthetic semi-fluid grease. AL-complex soap with PAO base oil. High thermal oxidation stability. High load carrying capability. Excellent wear protection. Suitable for gears in electrical tools and ball screws. Also excellent for lubricaion of needle bearings.

Thermoplex LC 302 EP*

-50°C
to
+150°C

Lithium/calcium-soap based grease with a special synthetic base oil. For the lubrication of precision highspeed XYZ axes. Also used for all kinds of precision and optical tools. Baseoil viscosity at 40 deg.C. 30 cst. Speed factor (nxdm) 1.800 000

Thermoplex TTF 122*

-70°C
to
+150°C

Grease suitable for extreme temperature change, for example landing gear in airplanes. Approved by Liebherr Aerospace and Embraer. Fully synthetic.

Turmogrease 2

-30°C
to
+130°C

Multi-purpose grease for all points of friction and lubrication in the beverage industry. Mineral, adhesive and resistant to hot and cold water.

Turmogrease BIO LC 1302

-30°C
to
+120°C

Quickly biodegradable special grease for long-term and life-time lubrication.

Turmogrease CAK 1002 EP

-35°C
to
+150°C

A water resistant calcium complex soap grease suitable for high loads in a humid atmosphere. e.g. construction machines, washing installations in the textile finishing sector, screening units, conveyors, large scale excavators, cold rolling mills in the steel industry, double roll crushers, etc.

Turmogrease CAK 2502*

-20°C
to
+170°C

Calcium complex grease with synergetic base oil in combination with selected anti-wear additives. Extremely water and coolant resistant. Application: Bearings on drilling rigs.

Turmogrease GA 280

-20°C
to
+160°C

Has especially been designed for the lubrication of single-lever mixers and double tap fittings. Fully synthetic, resistant to cold and hot water as well as to steam, adhesive and neutral towards elastomers (NBR, EPDM etc). As NSF registered H-1 products their contact with foodstuff is admissible.

Turmogrease GHM 200 plus

0°C
to
+160°C

Grease for the lubrication an doptimisation of the sealing effect of gas cocks. Also suitable as fitting grease for natural and town gas, propane and butane gas. The lubricating grease was tested and certified by the DVGW research division at the Engler-Bunte Institute of the University of Karlsfuhe. DIN lubricant designation: DIN EN 377, temperature classification E (0 to 160 degress C). A mineral, heavy, fibrous, no gumming. Resistant to gas and oxidation.

Turmogrease GVK 2 TF

-25°C
to
+250°C

It is outstanding for the lubrication of drum controllers in energy regulators. Fully synthetic, neutral behavior towards elastomers and has excellent wearing protection.

Turmogrease Highspeed L 252*

-50°C
to
+120°C

Universal high speed precision bearing lubricant.Highest speed factor in the industry.(Dnm >2.200.000) Extreme short running in procedure.Approved by all machine tool OEM and bearing manufacturers

Turmogrease LC 802 EP

-35°C
to
+140°C

Lubricating grease for high-load, high-speed and high-temperature application. Additives to optimize the lubricant properties like corrosion, nonferrous heavey metal and anti-aging protection, resistance of the lubricating film resp. high and low temperature behavior.

Turmogrease Li802EP

-35°C
to
+140°C

Special grease for heavy duty, high speeds and high temperatures for all rolling and sliding bearings (e.g. in grinding machines). Partly synthetic, long relubrication intervals, low noise. Not resistant to media.

Turmogrease LiAzR*

-55°C
to
+120°C

Semifluid for the lubrication of control gears in landing flaps of the Airbus fleet. Meets the requirements according to ZFB 831. Approved by Liebherr Aerospace. Fully synthetic, excellent corrosion and wearing protection.

Turmogrease N 4602

-30°C
to
+180°C

Synthetic long-term lubricating grease for hig temperatures. Resistant to cold and hot water,high pressure stability, e.g. load carrying capacity, very good wear protection, miscible with all soaps and organic thickened lubricating greases, excellent corrosion protection.

Turmogrease N 502

-50°C
to
+180°C

High and low temperature grease with excellent lubricating properties. High-speed grease for the lubrication of generators. Fully synthetic and good resistance to media.

Turmogrease N 503 B

-40°C
to
+160°C

Special grease with multi-purpose application possibilities. Fully synthetic, silicone-free, for high temperatures, at influences of cold/hot water as well as steam, aqueous alkaline or acid cleaning or washing media resp. it's vapors corresponding to DIN51807, good compatibility towards elastomers like NBR/FKM/Viton.

Turmogrease N 7501 K

-40°C
to
+160°C

Very adhesive special grease providing excellent compatibility with elastomers for the lubrication of seat sliding rails in car seats. Fully synthetic and excellent resistance to media.

Turmogrease NAK 500 MF

0°C
to
+100°C

Grease for the lubrication and sealing of gas cocks. Fitting grease for natural and town gas, propane and butane gas. It is resistant to all gases used in a household. DIN lubricant designation: DIN 3536-0-100 G. A mineral, heavy, fibrous, no gumming. Resistant to acids and alkalis and is resistant to oxidation.

Turmogrease NBI Grease Spray

-35°C
to
+140°C

Grease spray for rolling and sliding bearings in cellerage machines, e.g. bottle filling and washing machines, keg washing machines. Is a mineral, resistant to water and acids and high pressure absorbing ability.

Turmogrease PHS 1002

-40°C
to
+160°C

Noise-proved special grease with milti-purpose application possibilities. Partly synthetic, silicone-free for high temperatures at influences of cold/hot water as well as steam, aqueous alkaline or acid cleaning or washing media resp. it's vapors corresponding to DIN51807.

Turmogrease PU 703

-40°C
to
+180°C

Special bearing grease for long-term lubrication where high-performance lubricants are required. Noise reduced, chemically stable for medium up to high speeds for high and low temperatures. Universal application, also in electric motors(insulation class F).

Turmogrease SEB 3

-20°C
to
+120°C

Special grease to solve special lubrication problems in gas fittings, e.g. in building installations, in gas distributing mains and gas pipelines, in rolling and sliding bearings exposed to extreme service conditions, as lubricating and sealing grease providing extreme resistance to volatile hydrocarbon fuels as well as to car petrol and other hydrocarbons with a low boiling point. It is approved by the DVGW according to DIN 3536-20-120. Fully synthetic, extremely adhesive, resistant to acids and alkaline solutions, Resistant to liquid propane/butane, chlorinated solvents.

Turmogrease SKL 18

-50°C
to
+130°C

Smooth operation grease with low coefficients of friction evan at high speeds for electric window winders. Fully synthetic and good wearing protection.

Turmopast HTP 3200 KW

-40°C
to
+300°C

Special grease for the lubrication of textile steamers. Fully synthetic and is resistant to alkalis, acids and hydrocarbons.

Turmopast MA 2*

-40°C
to
+170°C

Fully synthetic grease for extreme conditions, resistant to steam, water and other aggresive chemical medias. Can be used as an assembly paste that prevents the formation of fretting corrosion and facilitates unscrewing. Outstanding for the lubrication of the swivelling rollers of hospital beds. Good adhesive properties, non-contaminating, reistant to disinfectants.

Turmopast TAS-WT 000 CRY

-30°C
to
+120°C

Special grease containing solid lubricants for highly loaded sliding surfaces. Excellent high pressure and anticorrosion properties. A mineral with good adhesive properties, metal affinity.

Turmoplex HD 2 MF*

-20°C
to
+140°C

Special grease with a very high base oil viscocity of V40 1000 cst. Containing MOS2 and graphite. Suitable for slow rotating bearings exposed to extreme loads. For example roller press in the cement industry or other application exposed to shockloads.

Turmoplex L 220

-15°C
to
+130°C

Special lubricating grease for high-loaded, slow-running roller and sliding bearings. Good emergency running properties, very good water resistance and wear/corrision protection, optimal resistance of lubricating film, excellent work stability with high sealing behavior, neutral towards metals, elastomers/plastics, elongation of lubrication intervals, reduced maintenance costs.

Turmoplex L 5002 MG*

-30°C
to
+140°C

Special grease with additives of MOS2 and graphite. The high base oil viscocity is suitable for roller bearings. Subject to high loads and high vibration. Suitable for pivot bearings with low rotating swivel movements. Shaking screens, rolling mill bearings, truck feeder plates and sliding bearings.

Turmosynth 2000

-20°C
to
+120°C

Tap grease for beer and bar fittings, applicable in dispenser installations and fittings in the brewing house and storage cellar. Sealing grease for automatic mashing machines. Neutral towards beer foam. Partly synthetic and steam resistant.

Turmosynth 2000 EL

-20°C
to
+120°C

Special grease for beer and air pipes of keg racking machines, good sliding properties of the pipes at low cellar temperatures. Lubricant for bar fittings. Neutral towards beer foam. A mineral and steam resistant.

Turmosynthgrease ALN 2502

-40°C
to
+160°C

Foodgrade grease with NSF H1 approval. High thermal and oxidation stability, high affinity towards metal, high load carrying capacity, high service life,wide service temperature range, high lubricating effect at low friction values, good wear protection.

Turmosynthgrease GL 320

-15°C
to
+120°C

Ideal lubricant with good sliding properties for different material combinations and specially for the lubrication of sun visors. Partly synthetic, low moment of friction and biodegradable.

Turmosynthgrease LMI 2

-20°C
to
+120°C

Special lubricating grease for bar fittings.A mineral and colorless.

Turmosynthgrease W2502

-30°C
to
+110°C

Universal grease for rolling and sliding bearings, joints, guideways, cam disks and threaded spindles. Partly synthetic, good adhesive properties and resistant to hot and cold water. Compiles with the NSF H-1 guidelines. High wearing protection. Resistant to cold and hot water as well as to media.

Turmotemp ll/400 CL 1 VAT*

-30°C
to
+260°C

For the lubrication of rolling and sliding bearings in nuclear and vacuum engineering. Fully synthetic, radiation resistance up to 10⁸ rad. Vacuum up to 10^-8 mbar. Formulation based on NSF H1 regulation for direct contact with food.

Turmotemp ll/400 dl fluid

-45°C
to
+180°C

Lubricant dispersio for the lubrication of exterior mirror adjusters. Fully synthetic, excellent resistance to oxidation. Outstanding wearing protection.

Turmotemp ll/400 RS 2

-30°C
to
+260°C

Heavy-duty and high-temperature grease for rolling and sliding bearings. All points of application have to be cleaned fat-free before use with special detergents, such as TURMOTEMP OIL 480, acetone, isopropanol or similar products. The full lubricating effect is only achieved on clean, fat-free and dry materials. Fully synthetic, low vapor pressure, non-toxic and non-combustible.

Turmotemp ll/400 VAC 1*

-35°C
to
+280°C

Fully synthetic vacuum grease, extremely low vapor pressure, vacuum range up to 10-6 mbar.Good dielectric properties and compatible with all materials. Non-toxic and non-inflammable, resistant to oxidation.

Turmotemp LM 182

-50°C
to
+150°C

Special grease with good smooth operating properties for special applications in stepper motors. Fully synthetic and good compatibility with elastomers.

Turmotemp LP 2502/5002

-30°C
to
+260°C

These greases are sued in corrugated roller bearings (cardboard production), chain return wheels and idle roller bearings exposed to high temperatures. They do not attack elastomers, nor non-ferrous or ferrous metals. All points of application must thoroughly be cleaned before using the lubricating greases. Fully synthetic, miscible with PTFE lubricating pastes. Compatible with all materials, cleaning without CFC and high wearing protection.

Turmotemp Super 2 EP

-30°C
to
+280°C

For all bearing types and all application ranges at temperatures up to 280 degrees. Environmentally friendly problem sollutions for all kinds of grease lubrication in the upper temperature range. A water-soluble cold detergent is sufficient to clean the lubricating points.Fully synthetic, long grease service life and long relubrication intervals.

Turmotex CAN 2502

-20°C
to
+200°C

Heavy-duty and high-temperature grease resistant to media. Partly synthetic, resistant to cold and hot water, to steam and alkaline solutions. High load carrying capacity.

Turmotex Highspeed L 252

-50°C
to
+140°C

Lubricating grease for high-speed textile spindles with favorable friction and noise behavior, suitable for long-term and for-life lubrication. This grease replaces the oil and oil mist lubrication in many cases. It shows best low temperature properties and only slightly warms up when used a high speeds. Fully synthetic, supple, work stable. Low moment of friction and low starting resistance. Volkmann/Saurer approval

Turmotex l/300

-30°C
to
+200°C

Heavy-duty and high-temperature grease not resistant to media. Fully synthetic, soft consistency and high load carrying capacity.

Turmotex LP 5002

-30°C
to
+260°C

High-temperature and heavy-duty grease, especially drveloped for roller bearings(e.g. Pero, Kero and spherical roller bearings) and for return systems in tier stenters. All points of application must thoroughly be cleaned. However, wer do not need any special cleansing agents which are harmful to the invironment, as it is required for PTFE containing lubricants.NLGIclass2

Turmotex N 2

-40°C
to
+160°C

Lubricating grease for high-speed versatile possibilities of use in industrial plants, particularly in the presence of aqueous aklkline, acid cleaning media or scouring media as well as their vapors, following DIN51807. Fully synthetic, is resistant to hot and cold water and has good pumpability in centralised lubricating systems.

Turmowood Grease HT 2

-30°C
to
+260°C

Suitable for extreme conditions in the lubrication of deep groove ball bearings, large rolling bearings, such as cylindrical, self-aligning and tapered roller bearings, as well as angular contact ball bearings. Lubricants with a drop point are known to become softer under thermal load and run back to the contact surfaces, thus contributing to an optimised lubrication pattern, i.e. the wear or fretting corrosion is reduced to a minimum.?Fully synthetic, resistant to temperatures, vacuum and radiation. Good resistance to media and chemically stable.

Turmowood Grease PM 2

-40°C
to
+220°C

With a continuous relubrication, this grease is the ideal lubricant for all rolling and sliding bearings in the dry and wet end section covering a wide temperature range. Fully synthetic, resistant to cold and hot water, compatible with NBR, FKM, PTFE, PA 6.6. Good pumpability in centralized lubricating systems.

Turmowood PFPE

-30°C
to
+260°C

For the life-time lubrication of rolling bearings running at low speeds,e.g. belt reversing pulleys. All points of application have to be cleaned fat-free before use with special detergents, such as TURMOTEMP OIL 480, acetone, isopropanol or similar products. The full lubricating effect is only achieved on clean, fat-free and dry materials.Fully synthetic, extremely low vapor pressure, non-toxic, non-combustible. Compatible with all materials and is resistant to oxidation.

Turmsilon GL 320

-50°C
to
+120°C

Suitable for the lubrication of cold and hot water fittings, ceramic cartridges, O-rings and single-lever mixers. Approved by KIWA KTW, WRc and WRAS. Fully synthetic, resistant to cold and hot water as well as to steam. Resistant to disinfectants, neutral towards elastomers (NBR, EPDM etc.), except for silicon caoutchouc. As NSF registered H1-products their contact with foodstuff is admissible.

Turmsilon GTI 300 P*

-40°C
to
+220°C

Silicone grease with a high thermal stability. Resistant against cold and hot water as well as water steam. Good chemical resistance. Neutral against FE and NE metals, synthetic materials and elastomers except silicone caoutchouc. Application: gluepot, fan bearings,tenter frames.

Turmsilon GTI 5000

-50°C
to
+220°C

For the lurbrication of rolling and sliding bearings in the nuclear engineering. Fully synthetic.

Turmsilon GTI 6001

-40°C
to
+250°C

Suitable for the lubrication of elastomers and ceramic disks in cold and hot water fittings. Fully synthetic, very adhesive, resistant to cold and hot water as well as to steam. Resistant to disinfectants, neutral towards elastomers (NBR, EPDM etc.), except for silicon caoutchouc. As NSF registered H1-products their contact with foodstuff is admissible.

Turmsilon LMI 5000

-40°C
to
+200°C

Silicon tap grease for particularly low and high temperatures, filler and feeder fittings with EPDM seals as well as rubber seals, e.g. collars, membranes and lip seals. Fully synthetic and steam resistant.

Turmsilon Medium TF*

-40°C
to
+230°C

Polyurea-based silicone grease. For very high temperatures. Completely water resistant. Is recommended for the lubrication of plastic parts. Also suitable for glue pots of edgebenders in the wood industry.

Ultratherm 2000

-60°C
to
+280°C

Ultra Vacuum 10-9 mbar lubrication of rolling and sliding bearings as well as seals. Lowest outgassing for space application.ESA/NASA approved. Fully synthetic, chemically stable and pressure resistant. Non-toxic and non-combustible and resistant to oxidation.

Ultratherm LS 1503

-70°C
to
+260°C

For the lubrication of rolling and sliding bearings in the nuclear engineering. Fully synthetic, resistant to vacuum and radiation up to 10-8rad. Non-toxic.

Oils:

Product Name

Temp. Range

Description

Corrolub HT 161

-30°C
to
+120°C

Special oil with excellent creeping and wetting properties. Universally applicable as lubricating and anticorrosion oil with a high cleaning effect. Fully synthetic, thin-bodied, high cleaning effect. Compatible with elastomers and plastics (IIR, NBR, neoprene or PA 6.6, PC, Zytel), easily biodegradable.

Elastolub K-line

-50°C
to
+250°C

Silicon containing mold release agent, not overpaintable. Excellent heat transfer oils. Lubricants for plastic/plastic and plastic/metal combinations. Fully synthetic and very good viscosity-temperature behavior.

Elastolub mv-line

-35°C
to
+250°C

Lubrication of sealing elements to improve the sliding ability and to reduce abrasion. Lubricating and sealing pastes for glass cocks in laboratories. Sliding agents for low temperatures, prevent the seals from sticking and freezing on. Behavior towards solvents and chemicals following DIN 51807, in detail upon request. Fully synthetic, resistant to steam, water and media and is non-toxic.

HiTempoil - Line

20°C
to
+350°C

These oils are used when a high resistance to radiation is required. Fully synthetic, resistant to temperatures and radiation. Neutral towards materials and is resistant to oxidation.

Korroquick-Spray*

0°C
to
+0°C

Penetrating spray. Moisture repellent, rust dissolver, cleaning fluid and lubricant with excellent creeping properties.Is adhesive and a good corrosion protection. Needed in all different industrial applications.

Terrasol W-line

-40°C
to
+160°C

These oils are suitable for the lubricatio of machines and devices used in ground water preservation areas. They contain additives which provide good lubricating properties and, furthermore, improve the low temperature behavior, i.e. they depress the pourpoint. Fully synthetic, good viscosity-temperature behavior. Silicon-free, no gumming, resistant to oxidation and easily biodegradable.

Turmocut

-40°C
to
+240°C

Oils with excellent properties for the lubrication of disc-cut/cutting systems and rotary cutter. Fully synthetic,good viscosity-temperature behavior.

Turmodent cleanfluid

0°C
to
+0°C

Dental

Turmodent H1

-20°C
to
+250°C

Fully synthetic high speed dental handpiece lubricant.Aproved by Siemens.

Turmodent H1 plus

-20°C
to
+140°C

Used for the maintenance and lubrication of high-speed bearings in dental turbines and drill heads. It is not attacked by water or disinfecting alcohol. Fully synthetic and good compatibility with elastomers.

Turmofilm Grease HT 2

-30°C
to
+260°C